SUPPLIES:
-
Pencil Cases
-
White Paint + Colored Paint of Your Choice (We
used neon!)
-
Paint Brush
-
Label/Adhesive Paper
-
Scissors or Craft Knife
-
Mod Podge
-
Glitter
-
Confetti
-
Printable Stencil
PROCEDURE:
1. Print out the stencil templates (or other
design of your choice!) on adhesive label paper
and cut out the black shapes/letters using scissors
or a craft knife (be really careful!). Be sure to save
the hearts from the inside of the glasses and the
center of the “O” from ZOMG.
2. Peel the backing off the stencil and adhere to the pencil case where desired.
3. Paint over the stencil with white paint to act as a primer. Let dry completely.
4. Paint with your color of choice and let dry, then peel back your stencil! If any paint seeped through, clean up the edges with a thin paint brush.
5. For the sunglasses: Adhere just the outline of the hearts to start and paint white. Let dry. Then put the “lens” cutouts that you saved on top of the white paint. (If the adhesive backing is super sticky, stick it onto your hand first to dull down some of the adhesive.) Then paint with the color you’d like and let dry. Remove the stencils. Lastly, paint mod podge over the remaining white heart shapes and sprinkle with glitter. Let dry, then seal with a final layer of mod podge over top the glitter!
6. Fort the confetti case: Paint the entire side of the case with mod podge and sprinkle with confetti. Let dry. If necessary repeat with a second layer, otherwise seal the confetti on with a final layer of mod podge.
Send pictures of your creation for a feature in Ayesha Magazine or on the Nasirat Website.
Owner/AuthorKelly Mindell Studio DIY & Yoobi Website link: https://studiodiy.com/
Supplies:
-
Pencil Cases
-
White Paint + Colored Paint of Your Choice (We used neon!)
-
Paint Brush
-
Label/Adhesive Paper
-
Scissors or Craft Knife
-
Mod Podge
-
Glitter
-
Confetti
-
Printable Stencil
PROCEDURE:
1. Print out the stencil templates (or other design of your choice!) on adhesive label paper and cut out the black shapes/letters using scissors or a craft knife (be really careful!). Be sure to save the hearts from the inside of the glasses and the center of the “O” from ZOMG.
2. Peel the backing off the stencil and adhere to the pencil case where desired.
3. Paint over the stencil with white paint to act as a primer. Let dry completely.
4. Paint with your color of choice and let dry, then peel back your stencil! If any paint seeped through, clean up the edges with a thin paint brush.
5. For the sunglasses: Adhere just the outline of the hearts to start and paint white. Let dry. Then put the “lens” cutouts that you saved on top of the white paint. (If the adhesive backing is super sticky, stick it onto your hand first to dull down some of the adhesive.) Then paint with the color you’d like and let dry. Remove the stencils. Lastly, paint mod podge over the remaining white heart shapes and sprinkle with glitter. Let dry, then seal with a final layer of mod podge over top the glitter!
6. Fort the confetti case: Paint the entire side of the case with mod podge and sprinkle with confetti. Let dry. If necessary repeat with a second layer, otherwise seal the confetti on with a final layer of mod podge.
Send pictures of your creation for a feature in Ayesha Magazine or on the Nasirat Website.
Owner/Author Kelly Mindell Studio DIY & Yoobi Website link: https://studiodiy.com/
